Clevite bearings have been our choice of bearings for many years.. P-Series bearings are built on hardened-steel backings with extra-thin overlays, and their oil grooves extend all the way around both halves for better oiling. Lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance.

Replaces your old stock plastic button that usually damages your front cover.

A billet double roller chain , no tensioner needed, a real quality piece.

FEL-PRO 1200 INTAKE GASKETS. THESE GASKETS ARE A 2 PIECE SET WITHOUT A VALLEY PAN. ALSO HAVE LARGER PORTS THAN THE STOCK REPLACEMENT INTAKE GASKET. ALLOWS YOU TO OPEN YOUR PORTS IN THE HEADS AND INTAKE FOR MORE AIRFLOW

Stock type forged piston, a must for any rebuild, comes in a variety of sizes.

These rings work perfect with TRW pistons. Available in a variety of sizes. SPECIFY SIZE WHEN ORDERING (STD,.010,020,030)

After years of use, stock springs begin to float at high RPM. These replace give you power at the top. Good for stock or mild cams.

You will need this when you change the plenum.